Product information "Walimex pro universal charger 12V/100-240V/700mA"


Charger for many round 3.6V 3.7V 7.2V and 7.4V Li-Ion batteries

Variable length due to sliding contact

Suitable for e.g. 2x AA/AAA or 1x 9V NiMH batteries

Connection to 100-240V via mains adapter or 12V car charger cable (both included)

Recognises voltage and polarity, battery cannot be inserted incorrectly

Charge status and battery type are shown on the display

Automatic switch-off, trickle charge & timer protection


Universal charger for Li-Ion and NiMH batteries

With the universal charger from Walimex pro you can charge almost all Li-Ion and NiMH batteries, both individual device batteries and universal round batteries or 9V blocks. It can be used for two AA or AAA or one 9V NiMH battery. The charger automatically recognises which battery type you have inserted. It also has a USB output with 5V / 500 mA so that you can charge any USB device such as smartphones or tablets. The charger can be used with the mains charging cable or the DC 12V car charging cable.


Easily customisable sliding contact

If you want to charge a Li-ion battery, you can easily adapt the charger to your battery using its sliding contact. The charger is therefore compatible with most 3.6V - 3.7V or 7.2V - 7.4V Li-ion batteries. The charger is not compatible with batteries from the InfoLithium series, NP-FC10 / Canon LP-E6 and NP-FR1 as well as Li-ion batteries with an operating voltage of less than 2.8V. The device batteries can be up to 4 cm wide and their poles must be at least 3 mm apart.


Automatic functions

The charger has many automatic functions. The automatic voltage change 100-240V enables carefree use, even abroad. It also has automatic polarity detection, automatic switch-off and timer protection. The LC display shows the battery type, voltage and charging status.